Yamaha RX-V861 - Manual (Page 14)

Quick start guide
10
En
Case C: “I want to listen to a music program of the
FM/AM radio station...”
Press F
SCENE4 (or
F
SCENE4) to select “Radio
Listening”.
• To use the “Radio Listening” template (Case C), you have
to tune into the desired radio station. See pages 50 to 52
for the tuning information.
• To achieve the best possible reception, orient the
connected AM loop antenna, or adjust the position of the
end of the indoor FM antenna.
y
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 33 for details.
■ After using this unit...
Press A
MAIN ZONE ON/OFF to set this unit to
the standby mode.
This unit is set to the standby mode and consumes a small
amount of power in order to receive infrared signals from
the remote control. To turn on this unit from the standby
mode, press the desired FSCENE buttons (or
FSCENE) or AMAIN ZONE ON/OFF on the front
panel (or HPOWER on the remote control). See page 25
for details.
Notes
What do you want to do with this
unit?
■ Customizing the SCENE templates
• Using various SCENE templates
☞ P. 33
• Creating your original SCENE templates
☞ P. 36
■ Using various input sources
• Basic controls of this unit
☞ P. 37
• Enjoying FM/AM radio programs
☞ P. 50
• Enjoying XM Satellite Radio programs
☞ P. 53
• Using your iPod with this unit
☞ P. 58
■ Using various sound features
• Using various sound field programs
☞ P. 42
• Using the pure direct mode for high fidelity
sound
☞ P. 48
• Customizing the sound field programs
☞ P. 61
■ Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room
(AUTO SETUP)
☞ P. 28
• Manually adjusting various parameters of
this unit
☞ P. 71
• Setting the remote control
☞ P. 85
• Adjusting the advanced parameters
☞ P. 93
■ Additional feature
Automatically turning off this unit
☞ P. 41