Customizing this unit (manual setup) – Yamaha RX-V861 User Manual
Page 73
CUSTOMIZING THIS UNIT (MANUAL SETUP)
69
En
AD
V
ANCED
OPERA
T
ION
English
You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ Auto setup
AUTO SETUP
Use this feature to automatically adjust speaker and system parameters (see page 28).
■ Manual setup
MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
Sound menu
1 SOUND MENU
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
Input menu
2 INPUT MENU
Use this menu to manually reassign the input/output jacks, select the input mode or rename the input source.
Customizing this unit (MANUAL SETUP)
Parameter
Features
Page
A)SPEAKER SET
Selects the size of each speaker, the speakers for low-frequency signal output, the crossover
frequency, and the assignment of the EXTRA SP terminal.
B)SPEAKER LEVEL
Adjusts the output level of each speaker.
C)SP DISTANCE
Adjusts the distance of each speaker.
D)EQUALIZER
Selects the equalizer setting of the speakers.
E)LFE LEVEL
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
F)DYNAMIC RANGE
Adjusts the dynamic range of Dolby Digital or DTS signals.
G)AUDIO SET
Adjusts the muting level, audio delay, maximum volume level and initial volume level.
H)HDMI SET
Selects the component to play back HDMI audio signals.
I)EXTD SUR.
Selects the mode of the decoders for the 6.1/7.1-channel playback.
Parameter
Features
Page
A)I/O ASSIGNMENT
Assigns the input/output jacks of this unit according to the component to be used.
B)INPUT RENAME
Changes the name of the input source.
C)VOLUME TRIM
Adjusts the output volume of each input source.
D)DECODER MODE
Selects the input mode for the sources connected to the DIGITAL INPUT jacks on the rear
panel of this unit.
E)MULTI CH SET
Sets the input channel numbers and other parameters of the multi channel input.