Zebra Technologies R110Xi - Manual (Page 82)

70 R110Xi/R170Xi User Guide 12/6/04 23063L-003 Rev. 1
RFID Guidelines
Creating Basic RFID Label Formats
RFID Label Format 1—Write a 96-bit Tag in Hexadecimal
Resulting Label
Programmed to Transponder
112233445566778899001122
Front Panel Display (toggles between these two)
Line
Number
Type This ZPL Code Function of ZPL Code
1 ^XA Indicates start of label format.
2 ^RS4 Sets tag type to EPC Class 1 96-bit.
3 ^FO50,50
^A0N,65
^FDSimple write example
^FS
Prints “Simple write example” on the label at
location 50,50.
4 ^RFW,H
^FD112233445566778899001122
^FS
W,H = write hex
Writes the 12 bytes of data (96 bits) to the
tag. The data written is:
112233445566778899001122
5 ^XZ Indicates end of label format.
Simple write example
RFID TAG DATA
1122334455667788
RFID TAG DATA
99001122