Xerox 4220/MRP - Manual (Page 78)

TROUBLESHOOTING
Table 6-1. Fax Setup menu error messages (continued)
Fax Setup Menu error messages Result/Reason Action
INVALID WITH PAPER SIZE IN TRAY n
1. CONTINUE
0. EXIT TO PREVIOUS STEP
n
= Input paper tray 1, 2, 3, or 4
An output destination is
selected (high-capacity
stacker) that cannot accept
output from the input tray
already selected. Use Scroll keys or direct
scrolling to:
[1] continue-- invalid entry is
not changed. You can
continue to make changes to
the Fax Setup, but you must
resolve this conflict before
exiting the menu.
[0] exit to the previous step
to select another output
destination that can accept
the output from the currently
selected input paper tray.
INVALID--TRAY 5 WITH OUTPUT DESTINATION
SELECTION. TO RETURN PRESS <CLEAR>.
You have attempted to exit
the Main Menu without
resolving the conflict between
Tray 5 as the default input tray
which conflicts with the
output destination selection
(top tray or high-capacity
stacker). Press the Clear/C key. You
are returned to the top of the
Fax Setup menu to select a
different input paper tray or
output destination.
INVALID--PAPER SIZE IN TRAY n WITH
OUTPUT DESTINATION. TO RETURN <CLEAR>.
n
= Input paper tray 1, 2, 3, or 4
You have attempted to exit
the Main Menu without
resolving the conflict between
the output destination
selected (top tray or high-
capacity stacker) that cannot
accept the size from the input
paper tray selected. Press the Clear/C key. You
are returned to the top of the
Fax Setup menu to select a
different input paper tray or
output destination.
Printer Configuration Report
The Hardware Status section of the Printer Configuration Report
reports the following information on the status of the fax
modem:
• When the fax modem is installed and working properly,
“Installed” is reported.
• When not installed, “Not Installed” is reported.
• If the fax modem has failed, “Failed” is reported.
5-6 XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE