Znyx Networks bh5700 - Manual (Page 179)

Example Output:
NOTE: This is the
zlc
output for a single Ethernet Switch Blade Base Interface in the
default configuration with no line cards installed in the chassis.
Testing the onboard RAM
You can test the onboard memory by running the free command. The free command will
output the current memory usage.
h-2.04#
Total Used Free Shared Buffers Cached
em: 254716 46816 207900 5088 10000 22664
-/+ buffers/cache: 14152 240564
wsp: 0 0 0
h-2.04#
Ethernet Switch Blade User's Guide release 3.2.2j page 179
sh-2.04# zlc zre0..23 query
zre0: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre1: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre2: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre3: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre4: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre5: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre6: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre7: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre8: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre9: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre10: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK
ON>
zre11: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK
ON>
zre12: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre13: <UP, 100FD, PAUSE ENABLE OFF, OK ON>
zre14: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre15: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre16: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre17: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre18: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre19: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre20: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK
ON>
zre21: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK
ON>
zre22: <UP, 100FD, PAUSE ENABLE OFF, OK ON>
zre23: <UP, 1000FD, PAUSE ENABLE ON, OK ON>
sh-2.04#