Znyx Networks bh5700 - Manual (Page 232)

zmirror is cumulative:
zmirror zre1, zre2, zre3 cpu
Is the same as:
zmirror zre1 cpu
zmirror zre2 cpu
zmirror zre3 cpu
Setting a different to port will overwrite the previous setting and direct previously mirrored ports
to a new to port. Given the last setup the following will change port 1 traffic to be forwarded to
port 10.
zmirror zre1 zre10
OPTIONS
-a Display the current mirroring setup
-e Set egress port mirroring for the specified from port
-t Teardown or disable the mirroring
WILDCARDS
Wildcard characters can be included to simplify the process of creating larger, more complex
configurations. Wild card characters for zconfig include:
, (comma) Use for creating lists
.. (dot-dot) Specifies an inclusive range
Below are some examples for the correct usage of the comma (,) and dot-dot (..). Each line below
produces the same results:
zre1, zre2, zre3, zre4
zre1..4
zre1, zre2..4
zre1..2, zre3..4
SEE ALSO
tcpdump(1M)
Ethernet Switch Blade User's Guide release 3.2.2j page 232