Zanussi ZSF2450 - Manual (Page 14)

The cleaning results are not satisfactory
The dishes are not clean • The selected washing programme is not applicable for the type
of load and soil.
• The basket is loaded incorrectly so that water cannot reach all
surfaces.
• Spray arm does not turn freely because of incorrect arrangement
of the load.
• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.
Limescales particles on the
dishes • The salt container is empty.
• The water softener is adjusted on a wrong level.
• The salt container cap is not closed correctly.
The dishes are wet and dull • No rinse aid has been used.
• The rinse aid dispenser is empty.
There are streaks, milky spots
or a bluish coating on glasses
and dishes • Decrease the rinse aid dosage.
Dry water drop signs on
glasses and dishes • Increase rinse aid dosage.
• The detergent can be the cause.
Technical data
Dimensions Width cm 54,5
Height cm 44,7
Depth cm 48,0-49,0
Electrical connection - Voltage
- Overall power - Fuse Information on the electrical connection is given on the rating
plate on the back of appliance.
Water supply pressure Minimum 0,8 bar (0,08 MPa)
Maximum 10 bar (1,0 MPa)
Capacity Place settings 6
Environment concerns
The symbol on the product or on its
packaging indicates that this product may not be
treated as household waste. Instead it should be
taken to the appropriate collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local council, your
14