Yamaha CC-75 - Manual (Page 23)

COMPACT DISC PLAYER OPERATION
Program play
You can program up to 20 tracks in any desired order.
1
Load discs and close the disc table.
2
When in the stop mode, press the PROG button to
prepare for programming.
*
“PROGRAM” and “P-01” will light up on the display,
and all track numbers on the selected disc begin
flashing.
3
If necessary, select a desired disc by pressing the DISC
SKIP button.
4
Use the track number input buttons to select the desired
track number.
*
The selected track number and the total play time of
the programmed tracks will light up on the display, and
soon it is replaced by the display of the next playback
order. Programmed track numbers on the selected disc
will stop flashing and light up on the music calendar.
* Pressing the TIME button displays the total play time of
the programmed tracks for about 1 second, and then it
is replaced by the display of the next playback order.
* For example, to choose selection 12
(1) Press the “+10” button.
(2) Press the “2” button.
5
Repeat steps 3 and 4 for any other track. Up to 20 tracks
can be programmed.
6
Press the play/pause / button to start playback of
programmed tracks.
Notes
•
It is also possible to program a sequence of tracks while
looking at the list of tracks on the surface of the disc
before closing the disc table.
• During playback or pause, programming is not possible.
• If the total time of the programmed tracks reaches 100
minutes or more, only the last two-digits will be displayed
for the three-digit number.
• The total time of the programmed tracks will not be
displayed, if a track number higher than 19 is
programmed.
• Skip search can be performed during playing back, but
only within the range of the programmed tracks.
• Manual search can be performed during playing back to
search through all tracks, including unprogrammed tracks.
• If programs are made selecting tracks from more than one
disc, pressing the PLAYXCHANGE button is useless
during program play.
E-15
English
1 2 3 4 5
CD
6 7 8
6 7 8 9 0
1 2 3 4 5
TIME PROG TAPE EDIT +10
A B C D E
REPEAT RANDOM STOP PLAY/PAUSE OPEN/CLOSE
MODE DISC SKIP TUNER
DECK
A/B
PLAY STOP PLAY
TAPE
INPUT REC/PAUSE
- +
- +
EFFECT LEVEL SP/PHONES MODE DSS
POWER SLEEP DISPLAY VOLUME
PROGRAM
2 3 4 5 6 7 8 9 10
11 12
1
TOTAL
PROGRAM
2 3 4 5 6 7 8 9 10
11 12
1
1 6
4
3
2
6
CD player
TIME
TIME
1
Display information during programming
Playback order
Selected disc
Selected track number
Total playing time
Music calendar