Yamaha CC-75 - Manual (Page 49)

E-41
English
HOW TO USE THE BUILT-IN TIMER
1 2 3 4 5
CD
6 7 8
6 7 8 9 0
1 2 3 4 5
TIME PROG TAPE EDIT +10
A B C D E
REPEAT RANDOM STOP PLAY/PAUSE OPEN/CLOSE
MODE DISC SKIP TUNER
DECK
A/B
PLAY STOP PLAY
TAPE
INPUT REC/PAUSE
- +
- +
EFFECT LEVEL SP/PHONES MODE DSS
POWER SLEEP DISPLAY VOLUME
POWER
DISPLAY AUTO MEMO
POWER
SLEEP
Sleep timer operation
This unit can be turned off automatically.
1
Play the desired sound source.
2
Press the SLEEP button. “SLEEP” appears on the display,
and soon it is replaced by “2h00m”.
3
Press the SLEEP button repeatedly until the desired sleep
time appears on the display. The display will change as
described below. [Time is displayed by the hour (h) and
the minute (m).]
* The original display mode will resume about 4 seconds
after the selection is made.
* The SLEEP indicator will light up to indicate that the
sleep timer is on.
4
The unit will turn off automatically when the selected sleep
time passes.
To confirm the sleep time setting
Press the SLEEP button once. “SLEEP” appears on the
display, and soon it is replaced by the remaining time of the
selected sleep time.
To change the sleep time
While the SLEEP indicator is being illuminated, press the
SLEEP button repeatedly until the desired time appears.
To stop the sleep timer operation
Press the POWER switch, or press the SLEEP button
repeatedly until “OFF SLEEP” appears on the display.
(The SLEEP indicator will go out.)
To set the sleep time using front panel buttons
First press the DISPLAY button to display the current time.
Within 7 seconds, press the AUTO MEMO button. Whenever
the AUTO MEMO button is pressed, the sleep time changes.
Using the timer and the sleep
timer at the same time
1
Prepare timer play. (See page 38 and 39.)
*
Do not turn the power of this unit off after the timer
setting is finished.
2
Press the SLEEP button and set the sleep time.
When the sleep timer operation finishes, the timer will
function to turn the source on at the preset time.
Note
Do not make the timer time setting so that the timer will start
during sleep timer operation. (Since sleep timer operation
has priority, the timer will not operate.)
OFF SLEEP
(Sleep timer is off.)
2h00m 1h30m 1h00m 0h30m
↑
↑
↑ ↑ ↑
Receiver
DISPLAY