ZyXEL Communications MES-2110 - Manual (Page 179)

MES-2110 User’s Guide
179
C
H A P T E R
2 3
Command Line Interface
23.1 Overview
This chapter introduces the MES-2110’s command line interface (CLI).
23.1.1 Console Port Management
To manage the MES-2110 using the CLI:
1
Connect your computer to the console port on the MES-2110 using the
appropriate cable.
2
Use terminal emulation software with the following settings:
3
Press [ENTER] to trigger the login screen.
23.1.2 Logging in
Use the administrator password to log into the MES-2110. The default value
administrator login username and password are: admin and 1234.
The MES-2110 automatically logs you out of the management interface after five
minutes of inactivity. If this happens, simply log back in again.
SETTING DEFAULT VALUE
Terminal Emulation VT100
Baud Rate 9600
Parity None
Number of Data Bits 8
Number of Stop Bits 1
Flow Control None