ZyXEL Communications MES-2110 User Manual
Page 82
Chapter 10 802.1x
MES-2110 User’s Guide
82
Guest VLAN
You can configure this if you have enabled the guest VLAN feature in the
Configuration > Global Configuration screen
.
Select Enable then enter the number that identifies the Guest VLAN.
Make sure this is the Guest VLAN recognized in your network.
Clients belonging to the guest VLAN can access unprotected areas in your
network, such as the Internet.
Select Disable if you do not want to use this feature.
Reauthenticat
ion
Enable this if a subscriber has to periodically re-enter his or her username
and password to stay connected to the port.
Reauth-Period
(1-999999)
Specify how often (in minutes) a client has to re-enter his or her
username and password to stay connected to the port.
Default is 3600 minutes (or 1 hour).
Port
This indicates the port number.
Active
This indicates whether 802.1x authentication is enabled or disabled for
this port.
Guest VLAN
This indicates whether Guest VLAN is enabled or disabled for this port.
Reauthenticat
ion
This indicates whether Reauthentication is enabled or disabled for
this port.
Reauth-Period
(1-999999)
This indicates the Reauth-Period for the this port.
Undo
Click this to restore your last saved settings.
Apply
Click Apply to save your changes to the MES-2110’s run-time memory.
The MES-2110 loses these changes if it is turned off or loses power, so
use the Save Settings link in the navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Table 17 Configuration > Port Configuration (continued)
LABEL
DESCRIPTION