ZETA Music Systems ZMC-200 - Manual (Page 48)

43
ZETA Music Systems, Inc.
ZMC-200 Manual Rev2.0
•
Chain Number
•
Preset Chain and Number
•
Step Number
This information is displayed when the “Chain” button is pressed.
The following Table shows the location of each of these
information labels:
Chain Name
Chain Number
Preset Name & Number Step Number
Example:
No Name 5
5
Heaven 17 1
CREATING CHAIN PRESETS
Press the CHAIN button on the front of your ZETA SYNTHONY II, and
select the desired chain preset using the +/- Value buttons. Press the EDIT
button, and you are now ready to begin programming your chain. The
following parameters can be accessed by pressing the +/- Parameter
buttons:
CHAIN PRESET NAME
(max. 12 Characters)
Use a name that describes the function of of your chain, e.g. the name of
the song with which it will be used. Press the ENTER button and use the
+/- Value buttons to select each character and the +/- Parameter buttons to
maneuver to the next (or previous) character.. Press the EXIT button when
you are finished naming your Chain Preset. As with all other Text-Editor
functions some of the front panel buttons have special functions when in
this mode (A…Z, a…z, !…9, space, insert, delete).
PROGRAM
(1…128)
Use the +/- Value buttons to select the desired Preset number for the
present step. Press the ENTER button. This moves you to the next step in
the chain.