ZyXEL Communications 2000W - Manual (Page 10)

Prestige 2000W Quick Start Guide
10
3.2.2 DHCP
If you do not have a specific IP address for your Prestige, use the following directions to set your Prestige to
get it automatically via DHCP (Dynamic Host Control Protocol).
3.2.3 PPPoE
7 Clear the subnet mask and enter your’s. Subnet Mask
255.255.255.0
Ok Aa1@ Clear
8 Select Gateway.
1. Network Mode
2. IP Address
Select Back
9 Clear the gateway IP address and enter your’s.
10The Prestige restarts when you return to the main screen. Gateway
192.168.1.1
Ok Aa1@ Clear
1 Select Net Settings in the first menu screen (use the up or down arrow to
highlight it and then press the Left key).
5. SIP Settings
6. Settings
Select Back
2 Select Network Mode.
2. IP Address
3. Subnet Mask
Select Back
3 Select DHCP.
4 The Prestige restarts when you return to the main screen.
[3] PPPoE
[1] Fixed IP
Select Back
4. Gateway
4. Net Settings
1. Network Mode
[2] DHCP
VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560