ZyXEL Communications 2000W - Manual (Page 14)

Prestige 2000W Quick Start Guide
14
Configure the Prestige to use an outbound proxy server if your LAN is behind a NAT router that does not
support SIP. If your voice service provider gave you an outbound proxy server address and port, then enter
them here.
3.3.3 Proxy Server
1 Select Outbound Proxy.
3. Proxy Server
4. User Account
Select Back
2 Select Proxy IP.
2. Port
Select Back
3 Use the left arrow button to clear the default text. Use the up and down arrows
to select the type of characters. Enter the outbound proxy server’s IP address
or domain name. Use the Left key to select Ok when you are done.
Proxy IP
sip.proxy.net
Ok Aa1@ Clear
4 Select Port.
1. Proxy IP
Select Back
5 Clear the port and enter the SIP outbound proxy server’s listening port number.
Leave the default port number if you were not given one to use.
Port
5061
Ok Aa1@ Clear
2. OutboundProxy
1. Proxy IP
2. Port
VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560