ZyXEL Communications 2000W - Manual (Page 9)

Prestige 2000W Quick Start Guide
9
If you were given an IP address and subnet mask, go to Section 3.2.1 on page 9 .
If you were not given an IP address and subnet mask, go to Section 3.2.2 on page 10 .
3.2.1 Fixed IP
With this option you have to manually enter an IP address, subnet mask and gateway IP address. These are
given to you by the network administrator.
1 Select Net Settings in the first menu screen (use the up or down arrow to
highlight it and then press the Left key).
5. SIP Settings
6. Settings
Select Back
2 Select Network Mode.
2. IP Address
3. Subnet Mask
Select Back
3 Select Fixed IP.
[2] DHCP
[3] PPPoE
Select Back
4 Select IP Address.
3. Subnet Mask
4. Gateway
Select Back
5 Use the left arrow button to clear the default text. Use the up and down arrows
to select the type of characters. Enter your IP address. Use the Left key to
select Ok when you are done.
IP Address
192.168.1.3
Ok Aa1@ Clear
6 Select Subnet Mask.
4. Gateway
1. Network Mode
Select Back
4. Net Settings
1. Network Mode
[1] Fixed IP
2. IP Address
3. Subnet Mask
VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560