Yamaha DS2416 - Manual (Page 13)

Wordclocks
11
DS2416—Owner’s Manual
Recording Digitally to the DS2416
In this example, a DAT deck is connected to the DS2416 D IN connector for
digital recording. The DS2416 works as wordclock slave, deriving its word-
clock from the D IN connection, and the DAT works as wordclock master.
Recording Digitally to DAT
In this example, the D OUT connector on the DS2416 is connected to the dig-
ital input of a DAT recorder for digital mixdown recording. The DS2416
works as wordclock master and the DAT works as wordclock slave. When the
digital input on the DAT recorder is selected as the recording source, the DAT
should automatically synchronize to the wordclock signal coming from the
DS2416. On some DAT recorders, the wordclock source may have to be set
separately. Refer to the instructions supplied with your DAT recorder.
IN L
IN R
OUT L
OUT R
D IN
D OUT
DAT
00.00.00.00
Digital Out
DAT recorder
(wordclock master)
DS2416
(wordclock slave
Source = D IN)
IN L
IN R
OUT L
OUT R
D IN
D OUT
DAT
00.00.00.00
Digital In
DAT recorder
(wordclock slave)
DS2416
(wordclock master)