Yamaha DS2416 - Manual (Page 23)

Specifications
21
DS2416—Owner’s Manual
Input Channels
De-emphasis (CH19, CH20) Automatically applied as needed
DC Cut Automatically applied as needed
ATT –96 to +12 dB (109 steps)
Phase Normal/reverse
4-band EQ
(12 EQ types per band)
Frequency 20 Hz to 20 kHz (120 steps, 12 points/octave)
Gain –18 to +18 dB (73 steps, 0.5 dB/step)
Q 0.1 to 10.0 (41 steps)
Dynamics
(6 types)
Threshold –54 to 0 dB (55 steps, 1.0 dB/step)
Attack 0 to 120 ms (121 steps, 1 ms/step)
Gain 0 to 18 dB (37 steps, 0.5 dB/step)
Release
5 ms to 42.3 s, fs = 48.0 kHz (160 steps)
6 ms to 46.0 s, fs = 44.1 kHz (160 steps)
Ratio 1.0 to infinity (16 steps)
Knee Hard, 1, 2, 3, 4, 5 (6 steps)
Range –70 to 0 dB (71 steps, 1.0 dB/step)
Hold
0.02 ms to 1.96 s, fs = 48.0 kHz (216 steps)
0.02 ms to 2.13 s, fs = 44.1 kHz (216 steps)
Decay
5 ms to 42.3 s, fs = 48.0 kHz (160 steps)
6 ms to 46.0 s, fs = 44.1 kHz (160 steps)
Width 1 to 90 (90 steps, 1.0 dB/step)
Mgain –18 to 0 dB (37 step, 0.5 dB/step)
Reduction
meter
–18 to 0 dB (12 steps)
Delay (CH1 to CH20)
0 to 2,600 samples (2,601 steps)
On/Off
On/Off
Fader –Infinity, –90 to +10 dB (128 steps)
Pan 33 steps
Channel meter
–72 to 0 dB (32 steps)
Pre/Post/Signal
Peak Hold
Decay Fast/Slow
Bus send
Level –Infinity, –120 to 0 dB (128 steps)
Pre/Post (Pre pan/post pan)
On/Off
Aux send
Level –Infinity, –120 to 0 dB (128 steps)
Pre/Post (Pre fader/post fader)
On/Off