Yamaha DS2416 - Manual (Page 153)

Effects Parameters
155
DS2416
MOD.FILTER (modulation filter)
DISTORTION
AMP SIMULATE
1. DST1, DST2, OVD1, OVD2, CRUNCH (DST = distortion, OVD = overdrive)
1. STK-M1: typical vintage amp stack sound, STK-M2: powerful three-stage amp
stack sound, THRASH: thrash sound used by thrash metal bands, MIDBST:
mid-range character, CMB-PG: Yamaha PG1 simulation (popular old preamp),
CMB-VR: VR6000 simulation, CMB-DX: vintage combo amp with rear-open
cabinet and exposed speaker, CMB-TW: typical American combo-amp sound,
MINI: mini-amp sound (below 10 W), FLAT: flat setting.
2. DST1, DST2, OVD1, OVD2, CRUNCH (DST = distortion, OVD = overdrive)
Parameter Range Description
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
TYPE LPF, HPF, BPF Filter type: low pass, high pass, band pass
OFFSET 0–100 Filter frequency offset
RESO. 0–20 Filter resonance
PHASE 0.00–354.38
°
Left-channel modulation and right-channel modu-
lation phase difference
LEVEL 0–100 Output level
Parameter Range Description
DST TYPE 1 Distortion type
DRIVE 0–100 Distortion drive
MASTER 0–100 Master volume
TONE –10 to +10 Tone
N.GATE 0–20 Noise reduction
Parameter Range Description
AMP TYPE 1 Guitar amp simulation type
DST TYPE 2 Distortion type
N.GATE 0–20 Noise reduction
DRIVE 0–100 Distortion drive
MASTER 0–100 Master volume
CAB DEP 0–100% Speaker cabinet simulation depth
BASS 0–100 Bass tone control
MIDDLE 0–100 Middle tone control
TREBLE 0–100 High tone control
EQ F 99–8.0 kHz Parametric equalizer frequency
EQ G –12 to +12 dB Parametric equalizer gain
EQ Q 10.0–0.40 Parametric equalizer bandwidth