Zenith HEALTHVIEW H20J55DT - Manual (Page 49)

Page 49 206-4065
Installer Menu
Detailed Descriptions for Installer Menu Items 60-I through 76-I
60-I. EN VIDEO COL (Enable Video Menu Color)
Set to 1 to enable custom color settings for the
Video menu. Set to 0 to disable custom color set-
tings for the Video menu.
61-I. FOR VIDEO M (Video Menu Foreground
Color)
0 = Black 3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
62-I. BCK VIDEO COL (Video Menu Background
Color)
0 = Black 3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
63-I. EN PTL COL (Enable V-Chip Menu)
Set to 1 to enable custom color settings for the V-
Chip menu. Set to 0 to disable custom color set-
tings for the V-Chip menu.
64-I. FOR PTL M (V-Chip Menu Foreground
Color) Set according to Color Chart.
0 = Black 3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
65-I. BCK PTL M (V-Chip Menu Background
Color) Set according to Color Chart.
0 = Black 3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
66-I. NOT USED
67-I. NOT USED
68-I. NOT USED
69-I. EN CH-T COL (Enable CH-Time OSD Color)
Set to 1 to enable custom color for the Channel-
Time display. Set to 0 to disable custom color for
the Channel-Time display.
70-I. FOR CH-T COL (Channel-Time Display
Foreground Color)
0 = Black 3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
Note: If foreground and background color are the
same, menu background is transparent.
71-I. BCK CH-T COL (Channel-Time Display
Background Color)
0 = Black 3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
Note: If foreground and background color are the
same, menu background is transparent.
72-I. NOT USED
73-I. CH NOT AVBLE (Channel Not Available)
When set to 1 and channel override is set to 0,
“NOT AVAILABLE” message is displayed when
directly accessing a channel not in the favorite
channel list. (Applies to NTSC Channels Only.)
74-I. CH-TIME SIZE
If set to 1 and transparent background is selected
for Channel-Time display, (foreground color = back-
ground color and custom color enabled) a large
channel number is displayed instead of the normal
Channel-Time display.
75-I. REVERT CH (Revert Channel)
If set to 1 and loss of M.P.I. communication
occurs, TV automatically tunes to the specified
Start Channel.
76-I. DEFEAT XDS
Set to 1 to disable XDS display. Set to 0 to enable
XDS display. XDS data (provided at the discretion
of the broadcaster), is available only on analog
channels. After a channel change, wait 5 seconds
then press ENTER to see XDS data, if available.