Zenith HEALTHVIEW H20J55DT - Manual (Page 9)

Page 9 206-4065
Cable TV
Wall Jack
Antenna
Cable
Typical
TV Back
M.P.I.
PILLOW SPEAKER
TV SPEAKER
VIDEO IN SPEAKER OUT
AUDIO IN
RF Coaxial Wire
(75 ohm)
Antenna
Cable
Typical
TV Back
M.P.I.
Cable TV
Wall Jack
Cable Box In
Out
RF Coaxial Wire
(75 ohm)
3 4
output
switch
PILLOW SPEAKER
TV SPEAKER
VIDEO IN SPEAKER OUT
AUDIO IN
Hook Up Cable Service (CATV)
1
2
Locate the RF jack on the back
of the TV set.
Connect the CATV cable that runs
from the wall to the
Antenna/Cable RF jack as shown
to the right.
Cable Service
Cable Service with a Cable Box
1
2
Locate the Antenna/Cable in jack
on the back of the TV set.
Connect the CATV cable that runs
from the wall to the cable box
and TV according to the connec-
tion diagram shown to the right.
If you’re using a cable box, tune
the TV to channel 3 or 4 and use
your cable box to change
channels.
If you’re using a cable box, Auto
Program might only find the
channel your cable service is on
(usually channel 3 or 4).
Connect cable service to the TV