Zebra Technologies LI 72 - Manual (Page 36)

36
RW 420 User Guide
mounted vertically. Refer to Figure 19.
Removing the Printer from the Cradle
Refer to Figure 21.
• Turn the Printer off.
• Push on the latch on the Cradle and rock the top of the
printer away from the Cradle.
• Lift the Printer out from the Cradle.
Replace the Docking Connector Cover if you will be us-
ing the Printer for an extended period of time away from the
Cradle.
Figure 21: Removing the Printer from the Cradle
Lift the printer
free of the
retaining pins.
Press the
Latch button
to release the
Printer.
Rotate the
Printer out
of the
Cradle.