Media specifications, Media specifications – Zebra Technologies LI 72 User Manual

Page 50

Advertising
background image

50

RW 420 User Guide

Media Specifications

Media Width

2.0 in. to 4.1 in.

(50.8 to 104.1 mm)

Max. continuous receipt

143 in. (3620 mm)

(w/std. memory)

Inter-label Gap.

0.08 in. to 0.16 in. (0.12 in. preferred)

(2 mm to 4 mm [3 mm preferred])

Label Thickness

.0025” to .0065” (.064 mm to .165 mm)

Max. Label Roll dia.

2.25 in. (57 mm) O.D.

Label Inner Core

.75 in. (19 mm) minimum dia;

1.38 in. (35 mm) optional setting

Black Mark

The reflective media black marks should

Dimensions

extend past the centerline of the roll.

Media

Minimum mark width: 0.5” (12.7mm)

Requirements

perpendicular to edge of media, centered within

the width of the roll.

Mark length: 0.094” (2.4 mm) parallel to edge of

media

Use Zebra brand direct thermal media that is outside wound. Media may be
reflective (black mark) sensing, or transmissive (gap) sensing, die-cut, or
continuous. RW 420 configured with the External Media option will accept fanfold
media used with an external media supply.
For die-cut labels, use only full auto dies.


Advertising