Yamaha 303 User Manual

Page 159

Advertising
background image

Using a Microphone (CVP-305/303)

Editing Vocal Harmony Parameters

CVP-305/303/301 Owner’s Manual

159

Editable Parameters in the VOCAL HARMONY EDIT Display

VOCODER TYPE

Determines how the harmony notes are applied to the micro-
phone sound when the Harmony mode (page 163) is set to
“VOCODER.”

CHORDAL TYPE

Determines how the harmony notes are applied to the micro-
phone sound when the Harmony mode (page 163) is set to
“CHORDAL.”

HARMONY GENDER TYPE

Determines whether the gender of the harmony sound is
changed or not.
Off

The gender of the harmony sound is not changed.

Auto

The gender of the harmony sound is changed automatically.

LEAD GENDER TYPE

Determines whether and how the gender of the lead vocal sound
(i.e., the direct microphone sound) will be changed. Please note
that the number of harmony notes differs depending on the
selected type. When set to Off, three harmony notes are pro-
duced. Other settings produce two harmony notes.
Off

No gender change occurs.

Unison

No gender change occurs. You can adjust the LEAD GENDER
DEPTH below.

Male

The corresponding gender change is applied to the lead vocal.

Female

The corresponding gender change is applied to the lead vocal.

LEAD GENDER DEPTH

Adjusts the degree of lead vocal gender change. This is available
when the LEAD GENDER TYPE above is set to other than Off.
The higher the value, the more “feminine” the harmony voice
becomes. The lower the value, the more “masculine” the voice.

LEAD PITCH CORRECTION

When “Correct” is selected, the pitch of the lead vocal is shifted
in precise semitone steps. This parameter is only effective when
the LEAD GENDER TYPE above is set to other than Off.

UPPER GENDER THRESH-
OLD

Gender change will occur when the harmony pitch reaches or
exceeds the specified number of semitones above the lead vocal
pitch.

LOWER GENDER THRESH-
OLD

Gender change will occur when the harmony pitch reaches or
exceeds the specified number of semitones below the lead vocal
pitch.

UPPER GENDER DEPTH

Adjusts the degree of gender change applied to harmony notes
higher than the UPPER GENDER THRESHOLD. The higher the
value, the more “feminine” the harmony voice becomes. The
lower the value, the more “masculine” the voice.

LOWER GENDER DEPTH

Adjusts the degree of gender change applied to harmony notes
lower than the LOWER GENDER THRESHOLD. The higher the
value, the more “feminine” the harmony voice becomes. The
lower the value, the more “masculine” the voice.

VIBRATO DEPTH

Sets the depth of vibrato applied to the harmony sound. Also
affects the lead vocal sound when the LEAD GENDER TYPE
above is set to other than Off.

VIBRATO RATE

Sets the speed of the vibrato effect. Also affects the lead vocal
sound when the LEAD GENDER TYPE above is set to other than
Off.

VIBRATO DELAY

Specifies the length of the delay before the vibrato effect begins
when a note is produced. Higher values result in a longer delay.

Advertising
This manual is related to the following products:

301