Yamaha 303 - Manual (Page 36)

Quic
k Guide
CVP-305/303/301 Owner’s Manual 36
Boost the volume of the part to be practiced
On the CVP, a single Song can contain separate data for up to sixteen MIDI channels. Specify the channel for practic-
ing and increase the playback volume for the channel.
1
Select a Song. The method for selecting a Song is the same as “Playing a preset Song (page 34)” or “Playing a Song
from SmartMedia card (page 35).”
2
Press the [MIXING CONSOLE] button to call up the MIXING CONSOLE display.
3
Press the TAB [√][®] buttons to select the VOL/VOICE tab.
4
Press the [MIXING CONSOLE] button until “MIXING CONSOLE (SONG CH1–8)” is shown at the top of the dis-
play.
5
Press the [E]/[J] button to select “VOLUME.”
6
To raise the level of the desired channel(s), press the appropriate buttons [1π†]–[8π†].
If the desired channel is not shown in the MIXING CONSOLE (SONG CH1–8) display, press the [MIXING CON-
SOLE] button to call up the MIXING CONSOLE (SONG CH9–16) display.
If you don’t know which channel’s volume to raise:
• Look at the illustrations of the instruments indicated below “VOICE.”
• Look at the channel indicators, which light as the Song plays back. Watching these as you listen can show you
which channel you wish to boost.
2, 4
3