Yamaha 303 User Manual
Page 96
Using, Creating and Editing
V
oices
Voice Creating (Sound Creator)
CVP-305/303/301 Owner’s Manual
96
EFFECT/EQ
Same parameters as in the SOUND CREATOR “EFFECT/EQ” tab display explained
on page 92.
Disabling automatic selection of Voice Sets (effects, etc.)
Each Voice is linked to its related parameter settings that are indicated in the
SOUND CREATOR displays, including effects and EQ. Usually these settings
are automatically called up when a Voice is selected. However, you can also
disable this feature by the operation in the relevant display as explained
below.
For example, if you want to change the Voice yet keep the same Harmony
effect, set the HARMONY/ECHO parameter to OFF (in the display explained
below).
You can set these independently by keyboard part and parameter group.
1 Call up the operation display.
[FUNCTION]
→ [E] REGIST.SEQUENCE/FREEZE/VOICE SET → TAB [®]
VOICE SET
2 Use the [A]/[B] buttons to select a keyboard part.
3 Use the [4π
π
π
π†
†
†
†
]–[8π
π
π
π†
†
†
†
] buttons to enable/disable automatic calling
up of the settings (ON or OFF) independently for each parameter
group.
Refer to the separate Data List for a list of parameters contained in each
parameter group.