Yamaha 303 - Manual (Page 85)

Using, Creating and Editing
V
oices
Editing the Volume and Tonal Balance (MIXING CONSOLE)
CVP-305/303/301 Owner’s Manual 85
6
Use the [3π π π π† † † † ]/[4π π π π† † † † ] buttons to select the part to which you want
to apply the effect.
7
Use the [5π π π π† † † † ]/[6π π π π† † † † ] buttons to select the effect CATEGORY.
8
Use the [7π π π π† † † † ]/[8π π π π† † † † ] buttons to select the effect TYPE.
If you want to edit the effect parameters, go on to the next operation.
■ Editing and Saving the selected effect
9
Press the [F] (PARAMETER) button to call up the display for editing
the effect parameters.
10
If you have selected one of the DSP 2–4 effect blocks in step 5:
You can edit its standard parameters as well as its variation parameter.
To select the standard type of parameters, press the [B] button. To select its
variation parameter, press the [E] button.
Effect Block Effect-applicable parts Effect characteristics
REVERB All parts Reproduces the warm ambience of playing
in a concert hall or jazz club.
CHORUS All parts Produces a rich “fat” sound as if several
parts are being played simultaneously.
DSP1 STYLE PART
SONG CHANNNEL 1–16 In addition to the Reverb and Chorus types,
the Clavinova has special DSP effects, that
include additional effects usually used for a
specific part, such as distortion and tremolo.
DSP2
DSP3 RIGHT 1, RIGHT 2, LEFT,
SONG CHANNEL 1–16 Any unused DSP blocks are automatically
assigned to the appropriate parts (channels)
as needed.
DSP4 RIGHT 1, RIGHT 2, LEFT,
SONG CHANNEL 1–16,
MIC (CVP-305/303)