Zoom DUALCAM 300 - Manual (Page 6)

6
8. Select the Resolution tab and select both the 352 x 288 and the DSC
Expansion Mode boxes. Click OK to close the Setting window.
9. Click the icon of the camera pointing at a computer to move the pictures
stored in your camera to the PC.
10. Select the pictures you want to store on your computer by clicking the
Transfer or Transfer All button on the camera screen. You can erase the
pictures in your camera after you have transferred them by clicking the
Erase All button on the camera screen. Click Exit.
The Zoom DualCam 300 is bundled with the Arcsoft Software Suite. Use the
PhotoImpressions software to download, enhance, print, and add effects to
your photos. You can use this software to frame your pictures, and to make
calendars and greeting cards. Funhouse lets you have fun with your pictures,
merging them into the included images that come with the software.
To download photos in lower resolution modes, follow steps 1,2,3,4,5,6,9 and 10
above. To download videos, click the icon of the roll of film instead of the camera
in step 9.
Maintenance
Operating Environment: 41 to 104 deg F (5 to 40 deg C). 20-85% relative
humidity, non-condensing.
Never immerse the Zoom DualCam 300 in water or any liquid. Remove dust or
stains with a soft cloth dampened with water or neutral detergent. Keep the Zoom
DualCam 300 in a dry and cool dust-free environment or container when it is
NOT being used.
Remove the batteries when the Zoom DualCam 300 is NOT going to be used
over a long period.
Avoid dropping the Zoom DualCam 300 onto a hard surface. Do not disassemble
the Zoom DualCam 300.
Troubleshooting
Computer Display Resolution – You must set the resolution of the display on
your computer to 16 bit color or higher for optimum image display. Refer to the
video card manual or the procedure below:
1. Click
the Windows Start button followed by Setting and then Control Panel
from the pop-up menus.
2. Double-click the Display icon and click the Setting tab.
3. The Color Palette pull-down menu displays the current setting. Select High
Color (16 bit) or True Color (24 bit) and then click OK.
(If this option is not available to you, you may need to update your video
card driver. Please visit your video card manufacturer’s web site, download
the latest video driver available for your card, and install it per the
instructions provided by the card manufacturer. )
4. Restart your computer.
Camera Not Found Or Responding With Windows 98 – You probably need to
update some of your Windows 98 files. Connect to the Internet and click Start –
Windows Update and follow the on-screen instructions. Be sure to download all
Critical Updates.