Yamaha YSP-500 - Manual (Page 56)

USING THE SLEEP TIMER
54
En
Use this feature to automatically set this unit to the standby mode after a specified period of time. The sleep timer is
useful if you are going to sleep after a certain amount of time while this unit is still playing back a source.
1
Set the operation mode selector to YSP.
2
Press SLEEP repeatedly to set the interval
for the sleep timer.
Choices: 120min, 90min, 60min, 30min, OFF
The SLEEP indicator flashes in the front panel
display while switching the interval for the sleep
timer.
Each time you press SLEEP, the front panel display
changes as shown below.
3
Wait for a few seconds without operating this
unit to confirm the setting for the sleep timer.
The SLEEP indicator lights up in the front panel
display, indicating that the sleep timer is activated.
Using the sleep timer
4 6
3 2 1
+10 0
7 8 9
5
STEREO MY BEAM
SLEEP INPUTMODE
CH LEVEL MENU
RETURN TEST
5BEAM ST+3BEAM 3BEAM
VOL MODE
AUTO
SETUP
MACRO
TV
INPUT2 INPUT1
YSP
TV/AV
TV
ENTER
SUR. DECODE
MY SUR.
YSP
TV/AV
SLEEP
Flashes
SLEEP
SLEEP 120min
SLEEP 90min
SLEEP 60min
SLEEP 30min
SLEEP OFF
Lights up