Configuring modulation effect block parameters, For non-piano voices, Parameters for modulation effects – Yamaha CP5 User Manual
Page 18
Internal Design of the CP5 & CP50
Left & Right Parts
[RIGHT2] (CP5)
[LEFT]/[RIGHT] (CP50)
Song Setting Area
TRACK Part
MIC INPUT Part
Settings for All Parts
Settings for All Performances
18
CP5/CP50 Reference Manual
For non-piano voices:
In the case of non-piano voices, effects can be selected from the categories that make up the Other
group as described above. In addition, the modulation effects, which are primarily for PIANO and
E.PIANO voices, are grouped together in the MOD category. For more details regarding these
effects, see For PIANO and E.PIANO voices (page 15). All effects for non-piano voices function as
insertion effects.
Configuring Modulation Effect Block Parameters
Each Modulation Block effect is configured using a different set of parameters, which adjust the
sound of the effect in various ways. The following tables will describe the functions of each of these
parameters in alphabetic order, first for the modulation effects (specially designed for PIANO and
E.PIANO voices) and then for the effects from the Other group.
NOTE
For more details on the specific parameters associated with each different type of effect, see the Modulation Effect
parameter list in the Data List pdf document.
Parameters for modulation effects
Edit Sequence
Press and hold the [MOD FX] button (for at least one second)
Navigate to the second
and subsequent pages using the [ PAGE] and [PAGE ] buttons
Turn Knobs 1 to 3
On-screen name
(and full name)
Associated effects
Description
B
Bottom
Touch Wah and Pedal Wah
This parameter is used to set the lowest point
in the filter's sweep range.
C
Color
Small Phaser
This parameter is used to adjust the way in
which the phaser sweeps.
D
Delay
Symphonic
This parameter is used to set an offset for the
modulation delay time.
Depth
Flanger, Chorus, 816Chorus, and
Symphonic
This parameter is used to adjust the depth of
modulation.
Drive
Small Phaser and Max90
This parameter is used to set the phaser's
input level.
Touch Wah and Pedal Wah
This parameter is used to adjust the way in
which the sound distorts.
F
Feedback
Flanger and 816Chorus
This parameter is used adjust the degree to
which output from the effect is fed back into
its input.
M
Manual
Flanger
This parameter is used to set the offset value
for delay modulation.
Mix
Flanger, Chorus, 816Chorus, and
Symphonic
This parameter is used to adjust the volume
of the wet sound (i.e., the sound produced by
the effect).
Mode
Max100
This parameter is used to select the phaser
mode.
P
PdlCtrl
(Pedal Control)
Pedal Wah
This parameter is used to set the cutoff fre-
quency for the wah filter.
Phase
816Chorus
This parameter is used to set the phase offset
for the chorus effect.
Effect category
Effect name