Common settings area, Common – Yamaha CP5 User Manual
Page 31
Internal Design of the CP5 & CP50
Left & Right Parts
[RIGHT2] (CP5)
[LEFT]/[RIGHT] (CP50)
Song Setting Area
TRACK Part
MIC INPUT Part
Settings for All Parts
Settings for All Performances
31
CP5/CP50 Reference Manual
Common Settings Area
The Common Settings area is used to set parameters affecting all left and right parts in the current
Performance. The Common Settings screen extends over five individual pages.
Setting Performance Names & Playing Modes (Pages 1 and 2)
Edit Sequence
Press the [COMMON] button
Navigate to Page 1 or 2 using the [ PAGE] and
[PAGE ] buttons
Turn or press Knobs 1 and 2
Page
On-screen name
Description
1
Name
Names can be up to 10 characters in length, and details on how they are
set can be found in the Basic Operations section of the Owner’s Manual
booklet.
Cursor
Knob 1 can be turned to move the cursor within the Name field.
Data
Knob 2 can be turned to change the character at the current cursor posi-
tion.
Setting values:
• Lower case letters ................. abcdefghijklmnopqrstuvwxyz
• Upper case letters ................. ABCDEFGHIJKLMNOPQRSTUVWXYZ
• Numbers and symbols .......... 0123456789!”#$%&'()*+,-./:;<=>?@[\]^_`{|}~
2
Split
This parameter is used to specify whether or not the keyboard will be split
into upper and lower sections, overriding the individual parts’ NoteLimit set-
tings. When set to “on”, the Performance’s left and right parts are assigned
to sections above and below the key set using the Point parameter. When
Split is set to “off”, meanwhile, the individual parts’ NoteLimit settings (page
29) will apply.
Setting values: on or off
Point (Split Point)
This parameter is used to set the point (or key) at which the keyboard is
split between left and right parts.
Setting values: C-2 to G8
ZoneEdit
Press Knob 3 to open the Zone Edit screen (page 32).