Yamaha DTX700 - Manual (Page 31)

KIT
DTX700 Reference Manual 31
ResonanceLevel
Use this parameter to specify whether the toms should resonate
with kick sounds. The higher the setting, the greater the degree of
resonance. Set to “0” to prevent the toms from resonating.
Settings: off, 0 to 5
KIT/JOB
 List of Functions
From the Copy Pad page, you can copy settings
from one pad to another within the current drum kit.
Use Pad1 to select the pad whose settings are to be
copied and Pad2 to select the pad whose settings
are to be replaced. Then press the [F3] button (EXE-
CUTE) to copy the settings.
Pad to be copied (Pad1)
Use this parameter to select the pad whose settings are to be cop-
ied.
Pad to be replaced (Pad2)
Use this parameter to select the pad whose settings are to be
replaced.
Settings: SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff,
SnrClOff, Tom1Hd, Tom1Rm1, Tom1Rm2, Tom2Hd,
Tom2Rm1, Tom2Rm2, Tom3Hd, Tom3Rm1, Tom3Rm2,
RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg,
Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp,
HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick,
Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick, all
(available for Pad2 only)
From the Copy Kit page, you can copy all the set-
tings of any kit and replace those of the current kit,
which can be selected by pressing the [KIT] button.
Use Bank and Number to select the kit whose set-
tings are to be copied, and the press the [F3] button
(EXECUTE) to copy those settings.
Bank
Use this parameter to specify the type of kit to be copied. “PRE”
refers to the Preset kits stored as the DTX700’s default settings,
and “USER” refers to the User kits that can be accessed by press-
ing the [KIT] button to open the Kit page.
Kit Number (Number)
Use this parameter to specify the number of the kit to be copied.
Settings: 01 to 50 when Bank is set to “PRE”
01 to 60 when Bank is set to “USER”
NOTE
• Preset kits are permanent settings that serve as DTX700
defaults. Accordingly, you cannot access them by pressing the
[KIT] button or edit this kit data by, for example, changing a
drum voice. For details regarding the makeup of kit data,
see
page 5 .
For kit management tasks
KIT/JOB/COPY PAD
Job
CopyPad
CopyKit
ExchgPad
ExchgKit
ClearPad
ClearKit
KIT/JOB/COPY KIT