Yamaha DTX700 - Manual (Page 50)

TRIGGER
DTX700 Reference Manual 50
TRIGGER/JOB
From the Copy Pad page, you can copy data from
the current trigger setup on an individual pad basis.
Use Pad1 and Pad2 to select the pads, and then
press the [F3] button (EXECUTE) to copy the set-
tings.
Pad1
Use this parameter to set the pad whose settings are to be copied.
You can also strike a pad to select it.
Pad2
Use this parameter to set the pad whose settings are to be
replaced. You can also strike a pad to select it.
Settings: Snare, Tom1, Tom2, Tom3, Ride, Crash1, Crash2,
HiHat, Kick, Pad10, Pad11
From the Copy Trigger page, you can copy data into
the current trigger setup. Use Bank and Number to
select the trigger setup whose settings are to be
copied, and then press the [F3] button (EXECUTE) to
copy the data.
Bank
Use this parameter to indicate the bank containing the trigger
setup whose data is to be copied. “PRE” refers to the trigger set-
ups stored as the DTX700’s default settings, and “USER” refers
to the trigger setups that can be accessed by pressing the [KIT]
button followed by the [F2] button (TRIGGER) to open the Trig-
ger Setup page.
Settings: PRE, USER
Number
Use this parameter to specify the number of the trigger setup
whose settings are to be copied.
Settings: 01 to 09 when Bank is set to “PRE”
01 to 20 when Bank is set to “USER”
For trigger management tasks
TRIGGER/JOB/COPY PAD
TRIGGER/JOB/COPY TRIGGER