Yamaha DTX700 - Manual (Page 61)

FILE
DTX700 Reference Manual 61
5. Set a new name for the file.
Move the cursor to the Name row and press the dial to call
up the file naming page.
 Entering file names
5-1 Move the cursor within the name field using the [F1]
and [F3] buttons and select a character for that posi-
tion by turning the dial or pressing the [-/DEC] and
[+/INC] buttons. The following characters can be
used.
NOTE
• If you hold down the [SHIFT] button and press the
[F1] or [F3] button, the cursor will move to the start
or end of the file name field.
• If you hold down the [SHIFT] button and press the
[-/DEC] or [+/INC] button, or alternatively, hold
down the [SHIFT] button and turn the dial, the cur-
sor will jump between the “
”, “0”, “A”, and “~” char-
acters.
5-2
When you have entered the required name, press the
dial or the [EXIT] button to return to the previous
page.
NOTE
• Any space characters included in file names will
be automatically replaced with “_” (i.e., an under-
score).
6. When you have set the new file name, press the [F3] but-
ton (EXECUTE). You will be asked to confirm that the file
is to be renamed.
7. Press the dial to rename the file.
When the renaming process has been completed, the mes-
sage “Completed.” will be displayed and you will be
returned to the page from Step 2 above.
CAUTION
• Do not unplug the USB memory device from the
[USB TO DEVICE] port or turn off either the mem-
ory device or the DTX700 while a file is being
renamed. Failure to observe this precaution can
lead to the memory device or the DTX700 being
permanently damaged.
Carry out the following steps to delete files saved on
a USB memory device.
 Procedure
1.
Plug the USB memory device containing the file(s) to be
deleted into the [USB TO DEVICE] port on the side
panel.
2. Navigate to the Menu area’s File/Delete page.
The page will appear as follows.
3.
Select the type of file you wish to delete.
3-1
Turn the dial to move the cursor to the Type row, and
then press the dial.
3-2 Select the type of file to be deleted by turning the dial
or pressing the [-/DEC] and [+/INC] buttons.
Settings: All, AllKit, AllWave, AllSong, AllTrigger, Util-
ity
3-3
When you have made your selection, press the dial
once again.
FILE/DELETE
All
All User data – i.e., all User kits, User
waves, User songs, and User triggers
in addition to utility data
AllKit All User kit data
AllWave All wave data
AllSong All User song data
AllTrigger All User-trigger data
Utility Utility data