Yamaha PJP-100UH - Manual (Page 22)

18
SETTING MENU LIST
• Room Size is the function for reducing echo on the other party
of communication. Room Size cannot reduce the echo that is
heard from the unit installed on the local location.
• Positions “Medium” and “Small” can improve the echo
processing capability but lowers the communication quality.
These positions should be selected only when echo is heard on
the other party.
Using the keys on this unit
In the initial display or the display during communication,
select “Settings”
→ “Sound Settings” → “Room Size”.
■ Configuring the external input/output
setting
You need to configure this setting when you connect an
external audio equipment to this unit. The default setting
is “None”.
• None: Disables the external input/output.
• Audio (default): Select this setting when connecting
external audio equipment to this unit.
• Coupled: When coupled connection of two units
(page 14) is used, select this setting on the PJP
connected to the PC through USB (master unit).
Using the keys on this unit
In the initial display, select “Settings”
→ “Sound Settings”
→ “External I/O”.
■ Adjusting the LCD contrast
You can adjust the contrast of the display by press VOL +/–.
Using the keys on this unit
In the initial display, select “Settings”
→ “General
Settings”
→ “LCD Contrast”.
■ Restoring the factory settings of this
unit
You can restore the factory settings of this unit. See
“Resetting the Unit” (page 23) for details.
Restoring the factory settings clears all of the settings you made.
Using the keys on this unit
In the initial display, select “Settings”
→ “Restore
Settings”.
Notes
Configuring general setting
Restoring the factory settings
Note
01EN_00_PJP-100UH_UCGB.book Page 18 Wednesday, August 23, 2006 1:49 PM