Zephyr COK-E48SX - Manual (Page 10)

www.zephyronline.com
In
s
ta
lla
ti
o
n
-
In
te
rn
a
l
B
low
e
r
8
The internal blower kit consists of the blower
and capacitor box with wiring. 1. Position blower as shown.
2. Att ach blower to flange as shown using
the provided 1/2” 5x15mm screws with
washers. 3. P osition capacitor box as shown.
4. Secure capacitor bo x to hood using the
provided 1/2” self tapping screws.
ATTENTION
The following are intructions for installing internal blower model CBI-600. For instructions on preparing for external
blower model CBE-1000 please turn to page “10”. Before installing, verify that motor spins freely.