Zephyr COK-E48SX - Manual (Page 20)

18
Replacing Light Bulbs:
CA UTION: Light bulbs become extremely hot when turned on. DO NOT touch bulbs until switched off
and cooled. Touching hot bulbs may cause serious burns.
Make sure all power is turned off and bulbs are not hot.
Remove bulb by pressing both ends of the metal retaining clip together, the light socket will now protude from the hood
allowing you to remove the bulb. (B e careful when releasing retain clip as it is under pressure to hold it in place)
Replacement halogen bulbs are available at most stores which sell light bulbs. Purchase type G U-10, 120 V, 50 W.
To replace mood lightingbulb, remove baffle filter from hood. Lift up the metal plate which is inside the hood on the left
and right sides. It is held on with two philips head screws. Unscrew mood lightingbulb counter-clockwise and replace
with a standard 40W, 125V-1 30V mediumbase bulb.
Press together
to release clip
HalogenBulb
MoodLightingBulb
MetalPlate
M
a
in
te
na
nce
-
Lights