Yamaha AV-S70 - Manual (Page 19)

17
English
REMO
TE CONTR
OL
APPENDIX
PREP
ARA
TION
OPERA
TION
OPERATING THE UNIT
Enjoying the Home Theater Sound System
This section describes how to select audio output from A/V component such as a TV, VCR, or DVD, LD, CD player, or MD
recorder as input source to the Home Theater Sound System AV-S70 and how to adjust levels.
First turn on the playback component and the TV, and then follow the steps given below.
1
Press POWER (or p on the remote control) to
turn on the power.
1 2 3
3
1
2
Front panel
or
If the STANDBY indicator is lit, turn on the power
using p on the remote control. If the main power is
off (when the STANDBY indicator is not lit), turn on
the power by pressing POWER on the front speaker
unit.
2
Press the INPUT selector button.
Each time the button is pressed, the input source will be
switched in the order: VIDEO
→
TV
→
AUX
→
DIGITAL 1
→
DIGITAL 2.
Front panel
or
3
Adjust the level using VOLUME +/– (or VOL +/–
on the remote control).
Pressing VOLUME + (or VOL + on the remote control)
increases the level, while pressing VOLUME – (or
VOL – on the remote control) decreases the level.
Front panel
or
OPERATION
Remote control
Remote control
Remote control
0104AV-S70_17-22_EN 3/29/0, 4:31 PM 17