Getting started, Checking the package contents, Readying the remote control – Yamaha AV-S70 User Manual

Page 4: Inserting the batteries, Precautions regarding batteries

background image



Checking the Package Contents

Check that the following accessories are included in the package.

Remote control

Batteries (AAA, R03, UM-4 type)

Audio connection cord (2 pin, 3m)

Velcro strips (2 sets)

Connection guide

Readying the Remote Control

Inserting the batteries


Remove the battery compartment cover.


Insert the four batteries (AAA, R03, UM-4 type)
with + and – oriented properly.


Close the battery compartment cover.

Precautions regarding batteries

Misuse of dry cell batteries may result in leakage or
bursting. Be sure to follow the precautions given below.

Insert batteries with (+) and (–) oriented according to the
marking in the battery compartment.

Do not mix old and new batteries.

Do not mix different types of batteries as they may offer
different voltage and performance even though they have
the same shape.

Remove all batteries when they can no longer be used or
when the remote control will not be used for an extended

Do not use rechargeable batteries.

If leakage occurs, wipe away all battery fluid inside the

Preserving the manufacturer code

Replace batteries early before they become unusable.
The manufacturer code set by the user will be preserved
for about two minutes when batteries run out or when
they are removed. Note that the manufacturer code
setting may be lost if more than two minutes elapses.


3/29/0, 12:49 PM