Zephyr Layers Wall ALA - M90ABX - Manual (Page 18)

www.zephyronline.com
The following instructions are for preparing the hood for use with an ex-
ternal or in-line blowers models CBE-1000 or PBN-1000A.
CAUTION: To reduce the risk of fi re and electric
shock, install this rangehood only with remote
blowers rated maximum 6.2 A.
For internal blower instructions please turn to
page 16.
1. Remove the (6) screws securing the blower pla-
te to the blower housing and remove blower
plate. See.Fig.1
2. Detach rectangular metal plate from blower
plate. See Fig. 2A Flip blower plate 90 degrees
and attach rectangular plate to blower plate side
with round knock-out.See Fig.2B
3. Re-install blower plate into blower housing by
following reverse instructions from step 1 then
use the screws provided to complete installa-
tion. (Tot.14 type B)
4. Remove top knock-out plate and remote blower
knock-out plate by using a fl at head screwdriver.
See Fig. 3 and Fig. 4
5. Secure 8” round blower collar to top of blower
housing using (4 type B) screws. See Fig. 5
Installa
tion - Ex
ternal & In-Line Blo
w
er P
repar
a
tion
- 18 -