Zoom G1U - Manual (Page 13)

24 ZOOM G1u
Effect Types and Parameters
25 ZOOM G1u
Effect Types and Parameters
C 0 C 9
Combo & ZNR
Combination of ZNR with amp simulator that recreates the sound of a combo amp with closed-back cabinet.
The right-digit value controls ZNR sensitivity.
B 0 B 9
Bright Combo & ZNR
Combination of ZNR with amp simulator that recreates the sound of a bright combo amp with open-back
cabinet. The right-digit value controls ZNR sensitivity.
S 0 S 9
Stack & ZNR
Combination of ZNR with amp simulator that recreates the sound of a stack amp cabinet. The right-digit
value controls ZNR sensitivity.
n MODULATION module
MODULATION (Type&Prm1) RATE (Prm2)
Selects the MODULATION module
effect type and controls parameter
1 at the same time.
Controls the value of parameter 2
of the MODULATION module. The
parameter action differs, depending
on the effect type.
C 1 C 9
Chorus
1 5 0
Rate
This effect mixes a variable pitch-shifted
component to the original signal. Higher
right-digit settings result in higher effect
sound mixing ratio.
Adjusts the modulation rate.
E 1 E 9
Ensemble
This is a chorus ensemble with three-
dimensional movement. Higher right-digit
settings result in higher effect sound mixing
ratio.
F 1 F 9
Flanger
1 5 0
Rate
This effect produces a resonating and strongly
undulating sound. Higher right-digit settings
emphasize the characteristics of the effect.
Adjusts the modulation rate.
S 1 S 9
Step
Special effect that changes the sound in a
staircase pattern. Higher right-digit settings
emphasize the characteristics of the effect.
P 1 P 9
Pitch Shift
1 1 2
D T
2 4
2 1
Shift
This effect shifts the pitch of the original
sound up or down. Higher right-digit settings
increase the mixing ratio of the effect sound.
Sets the pitch shift amount in semitones. "dt"
results in a detune effect.
M 1 M 9
Mono Pitch
This is a monophonic pitch shifter (for
single-note playing) with reduced flutter.
Higher right-digit settings increase the
mixing ratio of the effect sound.
H 1 H 9
HPS
(Harmonized Pitch Shifter)
C C O ,
D D O
F ,
,
E
F O G
,
A O B ,
G O A ,
Key
This is an intelligent pitch shifter that
automatically generates major scale
harmonies according to a preset key. Higher
right-digit settings increase the mixing ratio
of the effect sound.
Specifies the tonic for the scale used for
pitch shifting. The "o" symbol stands for #.
V 1 V 9
Vibrato
1 5 0
Rate
This is an effect with automatic vibrato.
Higher right-digit settings emphasize the
vibrato intensity.
Adjusts the modulation rate.
B 1 B 9
Pitch Bend
0 1 0
Pedal Position
This effect allows using the expression pedal
to change the pitch in real time. Right-digit
settings select the pitch change type caused
by the expression pedal (see Table 1).
Sets the initial value for the pitch shift
amount (the value that is active when the
pedal is at rest). The original sound/effect
sound level balance also changes according
to the parameter 1 setting.
b1
b2
b3
b4
b5
0 cent
0 cent
0 cent
0 cent
0 cent +1 octave
+2 octaves
-100 cent
-2 octaves
-
Pedal fully depressed
(maximum)
Pedal fully raised
(minimum)
Type&Prm1
[Table 1]
Prm2=0 Prm2=1.0
Pedal fully depressed
(maximum)
Pedal fully raised
(minimum)
Type&Prm1
Prm2=0 Prm2=1.0
b6
b7
b8
b9
-1 octave + original sound
-700 cent + original sound
Doubling
- (0Hz) + original sound
+1 octave + original sound
+500 cent + original sound
Detune + original sound
+1 octave + original sound
D 1 D 9
Delay
1 2 0
Time (Delay Time)
This is a delay with a maximum setting of
2000 msec. Higher right-digit settings
increase the mixing ratio of the effect sound
and the feedback amount.
Sets the delay time. In the 10 – 1000
millisecond range, the adjustment is
performed in 10-msec steps (1 – 99, 1.0).
Above 1 second, the adjustment is performed
in 100-msec steps (1.1 – 2.0).
1 9
CombFilter
1 5 0
Frequency
This effect uses the comb filter
characteristics generated by using fixed
modulation on the flanger as an equalizer.
Higher settings increase the mixing ratio of
the effect sound.
Sets the frequency to be emphasized by the
filter. Higher settings shift the emphasized
frequency upwards.
A 1 A 9
Air
1 1 0
Size
This effect reproduces the ambience of a
room, to create spatial depth. Higher settings
increase the mixing ratio of the effect sound.
Sets the size of the simulated space. Higher
settings values make the space bigger.
1 4
Phaser
1 5 0
Rate
This effect produces sound with a pulsating
character. The setting values change the type
of sound.
Adjusts the modulation rate.
n DELAY module
DELAY (Type&Prm1)
Selects the DELAY module effect type and controls parameter 1 at the same time.
D 1 D 9
Delay
This is a delay with a maximum setting of 5000 msec. The right-digit setting values control the mixing ratio
of the effect sound and the feedback amount.
T 1 T 9
Tape Echo
This effect simulates a tape echo with a long delay time of up to 5000 msec. The right-digit setting values
control the mixing ratio of the effect sound and the feedback amount.