Storing/copying patches (store mode), Select the store/copy target bank and patch number, Press the [store] key once more – Zoom G1U User Manual

Page 9: A8 b8 b8

Advertising
background image

16

ZOOM G1u

17

ZOOM G1u

Storing/Copying Patches (Store Mode)

Storing/Copying Patches (Store Mode)

The bank and patch number flash on the display.

Patches of the preset banks (0 – 9) are read-only. No

patches can be stored or copied into these locations. If

you press the [STORE] key while a patch from the

preset area is selected, the patch "A0" (bank A, patch

number 0) will be selected automatically as default

store/copy target.

• Use the [W]/[Q] foot switches to select the bank/

patch number.

• To switch only the bank, use the [BANK UP·

TAP] key.

· Only a user-editable bank (A – J) can be selected as

store/copy target bank.

· During the store/copy process, the foot switch (FS01)

cannot be used to change banks.

In play mode or edit mode, press the [STORE] key

1

Select the store/copy target bank and patch number

2

An edited patch can be stored in the user-editable banks (A – J). It is also possible to store an
existing patch in another location to create a copy.

When the store/copy process is completed, the G1u

returns to the previous mode, with the target patch

selected.

To cancel the store process, operate the [VALUE] knob

before pressing the [STORE] key again.

Press the [STORE] key once more

3

A0

NOTE

NOTE

A8

B8

B8

HINT

Even after overwriting user patches with
other patches, their original content can be
restored in a single operation ("All Initialize"
function).

To do this, turn power to the G1u on while
holding down the [STORE] key.

The indication "AL" appears on the display.

To carry out the All Initialize function, press
the [STORE] key once more. All patch
settings are returned to the factory default
condition, and the unit switches to play
mode.

To cancel All Initialize, press the RHYTHM
[

R

/

P

] key instead of the [STORE] key.


When you carry out All Initialize, any

newly created patches that were

stored in the user-editable bank will

be deleted (overwritten). Perform

this operation with care to prevent

losing any patches that you want to

keep.

Restoring Factory Defaults

AL

NOTE

Advertising