Xerox 701P47169 - Manual (Page 49)

FreeFlow Process Manager Operator and Administrator Guide 1-23
About FreeFlow Process Manager
6. In the displayed list of templates, click [+] to expand the
desired template, then select the appropriate signature.
7. Select [Add] to add the template and signature to the job file.
The job file template displays in the Template/Signature/Page
window.
8. Select [OK] to close the Signature Selection dialog.The job file
template displays in the Signature List window.
You must select a device type for each signature.
9. In the Signature List window, select the desired signature. The
[Device...] button is enabled.
10. Click [Device...].
11. In the Choose Device window, select [Press Sheet Size] as
the target device. You must select a device for each signature.
12. Select [OK] to close the Choose Device window.
13. To save the job file, select [File: Save Job] or [File: Save Job
As...]. Either opens the Save Job As dialog.
14. In the Save in list box, navigate to the FreeFlow Install
Directory\ImpositionJobs directory, typically, E:\ FreeFlow\
ImpositionJobs.
15. Type the appropriate file name, and select [Save].
16. Repeat steps 2-11 to add more job file templates.