Zenoah MISTER MD6210M - Manual (Page 2)

MD6210M
GB-2
EXPLANATION OF SYMBOLS AND SAFETY WARNINGS
WARNING!!!
RISK OF DAMAGING HEARING
Wear head, eye and ear protection.
APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION
DIRECTIVE 97/68/EC AMENDED 2002/88/EC
e13*97/68SH3G3*2002/88*0095*02
* Specifications are subject to change without notice
1) Noise emissions in the environment measured as sound power (L
WA ) in conformity with EC directive 2000/14/EC.
Reported soundpower level for the machine has been measured with the original attachment.
The difference between guaranteed and measured sound power is that the guaranteed sound power also includes disper-
sion in the measurement result and thevariations between different machines of the same model according to Directive 2000/
14/EC.
Reported data for sound pressure level (L
pARa
) at the operator’s ear for the machine has a typical statistical dispersion (stan-
dard deviation) of 1 dB (A),
2) Reported data for equivalent vibration level (a hv,eq ) at the control handle has a typical statistical dispersion (standard devia-
tion) of 1 m/s 2 .
SOUND LEVEL 1) VIBRATION LEVEL 2)
measured guaranteed
a
hv, eq
MODEL
MD6210M 62.0 cm 3 107 dB(A) 108 dB(A) 102 dB(A) 4.7 m/s 2
DISPLACEMENT
ISO 7917 2000/14/EC
L
WA
ISO 22867
L
p AR a
DESIGNATION : MISTER (Back-pack garden mister)
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
MODELS : MD6210M
SERIAL NUMBERS DATING : 2010 and onwards
(The year is clearly stated on the rating plate,
followed by the serial number)
This declaration conform with :
DIRECTIVE 2006/42/EC of 17 May, 2006
DIRECTIVE 2004/108/EC of December 15, 2004
(The following standards have been applied: EN 61000-6-1, EN 55012 (CISPR 12))
DIRECTIVE 2000/14/EC of 8 May, 2000
conformity assessment procedure followed ANNEX V
(The following standards have been applied: ISO 11094)
DIRECTIVE 97/68/EC of December 16, 1997
2002/88/EC of December 9, 2002
Date : 29 December 2009
Signature :
Kiyoshi Honda
General Manager, Development Center
Authorised representative :
Husqvarna AB
SE-561 82 Huskvarna, Sweden
Person authorised to compile the technical file :
Bo R Jonsson
SE-561 82 Huskvarna, Sweden
EC DECLARATION OF CONFORMITY
(Applies to Europe only)
The undersigned manufacturer,
Husqvarna Zenoah Co.,Ltd.,
1-9, Minamidai, Kawagoe, Saitama, Japan,
declares under sole responsibility that the following products referred to in this
declaration conform with the requirement of the following COUNCIL’S DIRECTIVE.
The products referred to are :