Zenoah MISTER MD6210M - Manual (Page 6)

MD6210M
GB-6
but do not squeeze the handles
with constant, excessive pres-
sures.
e) If you feel discomfort, redness
and swelling of your fingers or any
other part of your body, see a
doctor before getting worse.
8. The ignition system of your unit
produces an electromagnetic
field of a very low intensity. This
field may interfere with some
pacemakers. To reduce the risk
of serious or fatal injury, persons
with pacemaker should consult
their physician and the pace-
maker manufacturer before oper-
ating this tool.
OTHER PRECAUTIONS
• When engaged in spraying work
over a protracted period of time,
please have your health checked
regularly.
• Please carry out spraying in a
planned fashion, keeping a daily
record of the date and time of
spraying, the chemicals used, the
target pest, contents of the work,
duration of the work, and other
details.
• Please keep the following points
in mind when selecting or using
protective gear.
a) Protective clothing
Choose clothing that is cool to
wear and offers good ventilation
and waterproofing. In addition,
wear items that enable you to
carry out spraying work in total
comfort and safety.
b) Spraying hood
Use a hood with a brim that is
waterproof and covers your neck
and shoulders.
c) Gloves
Use gloves that are difficult for
chemicals to penetrate and do
not slip even if you perspire while
doing the work.
d) Rubber apron
When mixing chemicals, wear a
long, thick, and wide apron that
cannot be penetrated by chemi-
cal splashes.
e) Protective goggles, mask, etc.
S e l e c t s u i t a b l e p ro t e c t i v e
goggles, mask, rubber boots, eye
washer, and protective cream,
5. For safe operation
etc., paying attention to stan-
dards and the recommendations
of farm work safety promotion or-
ganizations.
WORKING CIRCUMSTANCE
1. To reduce the risk of injury asso-
ciated with exhaust fume inhala-
t i o n , d o n o t o p e r a t e i n
unventilated area. The exhaust
gases contain harmful carbon
monoxide.
2. Avoid using the machine where
stable footing and balance are
not assured.
3. Never operate the machine in
high wind, bad weather, poten-
tially explosive atmosphere, when
visibility is poor or in very high or
low temperatures. (Our recom-
mended use environment is be-
low 40 degrees C (104 degrees
F).)
AVOID NOISE PROBLEM
IMPORTANT
Check and follow the local
regulations as to sound level
and hours of operations for
machine.
1. Operate machine only at reason-
able hours-not early in the morn-
ing or late at night when people
might be disturbed. Comply with
times listed in local ordinances.
2. To reduce sound levels, limit the
number of pieces of equipment
used at any one time.
3. Operate the machine at the low-
est possible throttle speed to do
the job.
4. Check your equipment before op-
eration, especially the muffler, air
intakes and air filters.
WORKING PLAN
• When using for the first time, be-
fore commencing actual spraying
please receive guidance in oper-
ating the product from a person
with adequate experience.
• When planning your work sched-
ule, allow plenty of time to rest.
Limit the amount of time over
which the product is to be used
continuously to somewhere