Zenoah MISTER MD6210M - Manual (Page 4)

MD6210M
GB-4
2. Specification
MODEL MD6210M
Dimensions (LxWxH)** mm 354x520x740
Dry weight* kg 12.7
Fuel tank capacity liter 1.8
Engine type Air cooled 2-cycle gasoline engine
Displacement cm 3 62.0
Air filter Half wet polyurethane foam
Carburetor Diaphragm, rotary valve type
Ignition system C.D.I.
Spark plug NGK BPMR7A (Noise-proof)
Operating engine speed* rpm 2000 to 8900
Fuel consumption liter/h 1.9
Container capacity liter 18
Discharge Water l/min 4
Longitudinal coverage Watet Horizontal m 12
Water Vertical m 12
* with standard pipe **without pipe
Specifications are subject to change without notice.
3. Warning labels on the machine
If warning label peels off or becomes soiled and
impossible to read, you should contact the dealer
from which you purchased the product to order new
labels and affix them in the required location(s). Never modify your machine.
We won’t warrant the machine, if you use the
remodeled machine or if you don’t observe the
proper usage written in the manual.
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER COVER
The direction to open the choke
Position: AIR CLEANER COVER
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
4. Symbols on the ma-
chine
(1) WARNING! The machine canbe a dangerous tool if used incorrectly
or carelessly, which can cause serious or fatal injury to the opera-
tor or others.
(2) Read owner’s manual carefully and make sure you understand the
instructions before using the machine.
(3) Wear a protective mask, eye and ear protection.
(4) Wear foot protecion.
(5) Wear gloves.
(6) Hot surface
Avoid contact the hot surface during and immediately operation.
Keep all children, bystanders and helpers 15 meters away from the machine.
(1) (2) (3) (4) (5)
(6)