Yamaha DSP-AZ1 - Manual (Page 40)

E-
38
SPEAKER OUTPUT LEVELS
This section explains how to set the speaker output levels using the test tone generator. The “TEST DOLBY SUR.” is for balancing the
output levels of the six speakers required for surround sound systems. The “TEST DSP” is for balancing the front effect speakers with the
main speakers for the DSP sound field programs.
■ Button/switch to be used for adjustment ■ Before you begin
1 Set BASS, TREBLE and BALANCE on the front panel
to the center position.
2 Turn off BASS EXTENSION.
3 Set PARAMETER/SET MENU on the remote control to
PARAMETER.
Cautions
• Since this unit cannot enter the test mode while headphones are
connected to this unit, be sure to unplug the headphones from the
PHONES jack when using the test tone.
• If the headphone is connected while “TEST DOLBY SUR.” or
“TEST DSP” is being used, the testing mode will be cancelled.
PUSH
TV VOL CH VOLUME
DISC
PRESET A/B/C/D/E
TV MUTE
TV INPUT MUTE
EFFECT
STEREO
ON SCREEN
SLEEP
LEVEL
TEST
SET MENU
PARAMETER
PARAMETER/SET
MENU
TEST
BASS TREBLE
L R
BALANCE
BASS
EXTENSION
SET MENU
PARAMETER