Using the macro feature – Yamaha DSP-AZ1 User Manual
Page 77
E-
75
AD
V
ANCED
OPERA
TION
English
REMOTE CONTROL FEATURES
Using the Macro feature
The Macro feature makes it possible to perform a series of operations by pressing just one button. For example, when you want to play a CD,
normally you would turn on the components, select the CD input, and press the play button to start playback. The Macro feature lets you
perform all those operations by simply pressing the CD macro button. The macro buttons (the input selector buttons, SYSTEM POWER and
STANDBY) are factory set with macro programs. You can also program your own macros (see pages 76 and 77).
Macro buttons
SYSTEM POWER
STANDBY
V-AUX
TUNER
PHONO
CABLE
SAT
MD/TAPE
CD-R
CD
D-TV/LD
VCR1
VCR2
VCR3/DVR
DVD
*
1
In order to turn on some components (including YAMAHA components) connected to this unit, connect those components to the AC
OUTLET(S) on the rear panel. (Power control may not be synchronized with this unit depending on the component. For details, please
refer to the operation instruction for the connected component.)
*
2
If the macro you select includes power control functions, the component may be turned off if it is already on when you press the macro
button. For example, if your TV is on and you press the SYSTEM POWER macro button, the TV is turned off.
*
3
Playback can be started with any YAMAHA remote control-compatible MD recorders, CD players, CD recorders and DVD players. When
using macros to operate other components, it is either necessary to program PLAY on the control area of that component (see pages 68
and 69) or to set up a manufacturer code (see page 66).
*
4
When TUNER is selected as the input source, this unit receives the last station when this unit is set in the standby mode.
First
This unit turns on. (The components
connected to this unit turn on.) *
1
This unit enters the standby mode.
This unit turns on. (The components
connected to this unit turn on.) *
1
Second
TV turns on. (the TV whose manufac-
turer code is set up in the D-TV/LD
area) *
2
—
Input source is selected. (V-AUX)
Input source is selected. (TUNER) *
4
Input source is selected. (PHONO)
Input source is selected. (CABLE)
Input source is selected. (SAT)
Input source is selected. (MD/TAPE)
Input source is selected. (CD-R)
Input source is selected. (CD)
Input source is selected. (D-TV/LD)
Input source is selected. (VCR1)
Input source is selected. (VCR2)
Input source is selected. (VCR3/DVR)
Input source is selected. (DVD)
Third
—
—
—
—
—
—
—
Playback of MD/TAPE starts. *
3
Playback of CD-R starts. *
3
Playback of CD starts. *
3
—
Playback of VCR 1 starts.
Playback of VCR 2 starts. *
3
Playback of VCR3/DVR starts. *
3
Playback of DVD starts. *
3