Zebra Technologies TLP 3844-Z - Manual (Page 15)

Getting Started
This section describes how to set up your printer for the first time and use
the most common operating procedures for loading media in tear-off mode
and loading ribbon.
Modes of Printing
You can operate this printer in different modes:
■ Standard tear-off mode allows you to tear off each label (or a strip of
labels) after it is printed.
■ In optional peel-off mode, the backing material is peeled away from the
label as it is printed. After this label is removed, the next one is printed.
■ In optional cutter mode, an attached unit cuts through the media.
The printer typically uses roll media, but you can use fan-fold or other
continuous media as well.
For procedures to use optional modes and features, refer to the Operation
and Options section.
980441-001 Rev. A 7