ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 124)

ZyWALL 100 Internet Security Gateway
NAT 12-11
FIELD DESCRIPTION EXAMPLE
Type These are the mapping types discussed above (see Table 12-2). Server
allows us to specify multiple servers of different types behind NAT to this
machine. See later for some examples. Server
Once you have finished configuring a rule in this menu, press [ENTER] at the message “Press ENTER to
Confirm…” to save your configuration, or press [ESC] to cancel.
User-Defined Address Mapping Sets
Now look at option 1 in menu 15.1. Enter 1 to bring up this menu. Look at the differences from the
previous menu. Note the extra Action and Select Rule fields mean you can configure rules in this screen.
Note also that the [?] in the Set Name field means that this is a required field and you must enter a name for
the set.
The entire set will be deleted if you leave the Set Name field blank and press
[ENTER] are the bottom of the screen.
Figure 12-8 Menu 15.1.1 — First Set
Menu 15.1.1 - Address Mapping Rules
Set Name= NAT_SET
Idx Local Start IP Local End IP Global Start IP Global End IP Type
--- --------------- --------------- --------------- --------------- ------
1.
2
3.
4.
5.
6.
7.
8.
9.
10.
Action= Edit Select Rule=
Press ENTER to Confirm or ESC to Cancel: