ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 51)

ZyWALL 100 Internet Security Gateway
4-2 SMT Menu 1 – General Setup
4.2.1 DYNDNS Wildcard
Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be aliased to the same IP address
as yourhost.dyndns.org. This feature is useful if you want to be able to use for example,
www.yourhost.dyndns.org and still reach your hostname.
4.3 General Setup
Step 1. Enter 1 in the main menu to open Menu 1 — General Setup.
Step 2. The Menu 1 - General Setup screen appears, as shown next. Fill in the required fields.
Figure 4-1 Menu 1 — General Setup
Table 4-1 General Setup Menu Field
FIELD DESCRIPTION EXAMPLE
System Name Choose a descriptive name for identification purposes. It is
recommended you enter your computer’s “Computer name” (see
section 4.1) in this field. This name can be up to 30 alphanumeric
characters long. Spaces are not allowed, but dashes “-” and
underscores "_" are accepted. ZyWALL
Domain Name Enter the domain name (if you know it) here. If you leave this field
blank, the ISP may assign a domain name via DHCP. You can go to
menu 24.8 and type "sys domain name" to see the current domain
name used by your router.
If you want to clear this field just press [SPACE BAR] and then
[ENTER]. The domain name entered by you is given priority over the
ISP assigned domain name.
zyxel.com.tw
Edit Dynamic
DNS Press [SPACE BAR] and then [ENTER] to select Yes or No (default).
Select Yes to configure Menu 1.1 — Configure Dynamic DNS
discussed next. No
(default)
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Menu 1 - General Setup
System Name= ZyWALL
Domain Name=zyxel.com.tw
Edit Dynamic DNS= No
Press ENTER to Confirm or ESC to Cancel: